Cura 15.04 시작/종료 Gcode

3D Printing에 사용하는 Cura의 시작/종료 Gcode는 Simplify3D의 그것보다 훨씬 길고 많은 작업을 수행하는데, 개인적으로 이쪽이 괜찮다 싶어서 한번 남겨봅니다.

Start code

;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} ;Filament used: {filament_amount}m {filament_weight}g ;Filament cost: {filament_cost} ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line ;M109 S{print_temperature} ;Uncomment to add your own temperature line G21        ;metric values G90        ;absolute positioning M82        ;set extruder to absolute mode M107       ;start with the fan off G28 X0 Y0  ;move X/Y to min endstops G28 Z0     ;move Z to min endstops G29        ;Run the auto bed leveling G1 Z15.0 F{travel_speed} ;move the platform down 15mm G92 E0                  ;zero the extruded length G1 F200 E3              ;extrude 3mm of feed stock G92 E0                  ;zero the extruded length again G1 F{travel_speed} ;Put printing message on LCD screen M117 Printing...

End code

;End GCode M104 S0                     ;extruder heater off M140 S0                     ;heated bed heater off (if you have it) G91                                    ;relative positioning G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way M84                         ;steppers off G90                         ;absolute positioning ;{profile_string}